2V0-620試験は非常に多くの問題ストックがあるだけなく、8時間の実技試験があるので、合格のためにはしかるべき圧倒的なネットワーク技術力が必要です。
VCP6-DCV資格2V0-620試験合格するだけならPassexamの2V0-620問題集を丸暗記すれば大丈夫です。
弊社のVCP6-DCV資格2V0-620勉強材料は知識ゼロの初心者でも勉強せずに受験しても合格できる。
弊社のVCP6-DCV資格2V0-620テキストをしっかり覚えて合格点ギリギリかな、というレベルだと思います。
VCP6-DCV資格2V0-620試験の合格ラインの300点ので、弊社の2V0-620参考書はテスト用の勉強は必要です。下記は2V0-620受験体験記です。

1.技術的な知識はあったので、Passexamでとにかく問題を解きました。

2.問題を解いたらPassexamでも問題を解くようにしました。

3.Passexamに載っている問題も数問出題されましたので、役に立ちました!
Passexamありがとうございます!

試験番号:2V0-620
試験名称:vSphere 6 Foundations Exam
所要時間(分):115
関連する認証:VCP6-DCV, VCP6-CMA, VCP6-DTM, VCP6-NV
質問数:65
試験製品:vSphere Version: 6
合格点:300
推奨トレーニング:vSphere: Install, Configure, Manage [V6] 検証済み:vSphere 6
試験価格:125米ドル
試験言語:英語、日本語
最初の利用可能なアポイントメント:2015年08月31日
フォーマット:単一および複数選択、プロクタード
試験の情報最終更新日:2015年09月01日

VCP6-DCV資格2V0-620試験では、VMware vSphere環境を理解して導入するために必要な基本的なスキルがあることを検証します。

弊社のVCP6-DCV資格2V0-620勉強資料が暗記してた問題の応用問題は役に立ちます。
弊社のVCP6-DCV資格2V0-620参考書は受験者によって実践を通して得られた結果です。
弊社のVCP6-DCV資格2V0-620試験資料を選択した場合は、知識を統合するために時間とエネルギーを大幅に節約することができます。
弊社のVCP6-DCV資格2V0-620学習材料を勉強したら、試験範囲に定められている技術をしっかりと理解すれば、本試験でも充分に対応する事が出来ます。

2V0-620試験の出題範囲には、以下のトピックが含まれます。

+セクション1:vCenter ServerとESXIのインストールと構成
+セクション2:vSphereネットワークの構成
+セクション3:vSphereストレージの構成
+セクション4:仮想マシンとvAppの展開と管理
+セクション5:可用性とリソース管理機能の確立と維持
+セクション6:基本的なトラブルシューティングを実行する
+セクション7:vSphere実装の監視

もし、VMware VCP6-DCV資格2V0-620試験材料を使用してから、不合格の場合、弊社で購入したお金を返金します。
弊社のVMware VCP6-DCV資格2V0-620勉強資料の使用は試験の合格に必要な知識を習得することができます。
弊社のVMware VCP6-DCV資格2V0-620学習問題集だけでは、試験の合格可能です。
弊社のVMware VCP6-DCV資格2V0-620試験資料を繰り返すことで、知識を把握して試験に合格することができます。
VMware VCP6-DCV資格2V0-620無料サンプルを見たいでしょうか?

1.An administrator is performing an interactive installation of ESXi 6.x.
Which three options are available for installation? (Choose three.)
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
Answer: A, B, C

2.An administrator is performing a scripted installation of ESXi 6.x.
In which three locations does the script need to be? (Choose three.)
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
Answer: B, C, D

3.Which three items should be validated prior to installing ESXi 6.x? (Choose three.)
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo Frames.
Answer: A, B, C

4.An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host.
How is the network initially configured?
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
Answer: D

5.An administrator has just completed installing an ESXi 6.x host, but doesn’t know what address has been configured.
Where is the ESXi host IP address configured?
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
Answer: B

6.An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface.
How can the configuration be validated as correct without any additional tools?
A. Add the host to vCenter Server and if it works, then all networking settings are ok.
B. Select the Test Management Network option from the DCUI.
C. Connect to the host with the vSphere Client and click the Test Network option.
D. Use PowerCLI to connect to the host and initiate a network test.
Answer: B

7.An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.
How can this be accomplished in the shortest amount of time?
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the Direct Console User Interface, select Reset System Configuration.
D. Use a host profile to reset the configuration to a default state.
Answer: C

8.Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host.
Which two actions can be used to run this script on an ESXi host? (Choose two.)
A. Connect to the host with Ruby vSphere Console and run the script from there.
B. Enable SSH access from the Direct Console User Interface.
C. Enable the ESXi Shell from the Direct Console User Interface.
D. Run the script directly from the vSphere Web Client.
Answer: B, C

9.What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?
A. Route based on orginating virtual port ID
B. Route based on IP Hash
C. Route based on source mac address
D. Route based on physical NIC load
Answer: A

10.How are ports scaled on vSphere Standard Switches (vSS)?
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
Answer: A

11.Which three connection types are available when configuring a vSwitch in the vSphere Web Client? (Choose three.)
A. VMkernel Network Adapter
B. Physical Network Adapter
C. Virtual Machine Port Group for a Standard Switch
D. vMotion Network Adapter
E. vSAN Network Adapter
Answer: A, B, C

12.How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch?
A. 64
B. 96
C. 128
D. 256
Answer: A

13.An administrator is configuring the Failover Order option on a vSphere Distributed Switch.
Which two options should be used with IP-hash load balancing? (Choose two.)
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
Answer: A, C

14.An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts.
Which Distributed Switch version should be created to support this configuration?
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
Answer: B

15.During a new vSphere Distributed Switch configuration, where does the Maximum Transmission Unit (MTU) value get modified?
A. Uplink Settings
B. Switch Settings
C. Portgroup Settings
D. NIC Teaming Settings
Answer: B

16.Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the Distributed Switch has been configured with a Network Profile.
D. Verify that Network I/O control for Management Traffic is configured for the highest share value.
Answer: A, B

 

Leave a Reply

Your email address will not be published. Required fields are marked *